BETOFORM 90 The admixture is produced as a 35% concentration solution in accordance with TU BY 191604636.001-2012. An accelerating admixture designed for the manufacture of products from semi-dry concrete and mortar mixes (grade Zh5 and above) using vibropressing or extrusion methods. |
Printed format and Technical Certificate
BETOFORM 90
BETOFORM 90
ADMIXTURE PROPERTIES
The admixture is primarily intended for the production of hollow-core slabs using the long-line casting method, but it can also be successfully applied to the manufacture of all types of concrete products and reinforced concrete structures made from semi-dry mixes under factory conditions.
APPLICATION BENEFITS
DOSAGE
THIS INFORMATION IS FOR REFERENCE ONLY. PRODUCT TESTING UNDER PRODUCTION CONDITIONS IS REQUIRED FOR IMPLEMENTATION.
ADMIXTURE PROPERTIES
APPLICATION BENEFITS
- Improves the stability of the geometric dimensions of molded products;
- Prevents the punch from sticking to the surface of molded products;
- Optimizes the water-cement ratio of the concrete mix without compromising moldability;
- Increases the density and strength of the products;
- Enhances the surface quality category of concrete products;
- Reduces time and costs during vibropressing, increasing labor productivity;
- Significantly reduces the likelihood of efflorescence on the product surface.
- The admixture does not contain chlorides, can be used in reinforced and pre-stressed structures, and does not cause reinforcement corrosion.
DOSAGE
- The recommended dosage of BETOFORM 90 is 0.5–2.0% of the cement weight in liquid form.
- The dosage depends on the concrete mix design, product type, and specific structural features (Consult with our specialists).
THIS INFORMATION IS FOR REFERENCE ONLY. PRODUCT TESTING UNDER PRODUCTION CONDITIONS IS REQUIRED FOR IMPLEMENTATION.
ADMIXTURE PROPERTIES
- BETOFORM 90 is an effective hardening accelerator that increases the rate of concrete strength gain during the early stages of curing.
- It can be used for the manufacture of concrete paving slabs, curb stones, hollow-core slabs, concrete wall blocks, and other products made from concrete and mortar mixes based on Portland cement.
- The admixture can be used in reinforced and pre-stressed structures.
- The admixture does not contain chlorides.
- The admixture does not cause reinforcement corrosion.
OCCUPATIONAL HEALTH AND SAFETY
The admixture is classified as a low-hazard substance (Hazard Class IV according to GOST 12.1.007-86) in terms of its effect on the human body.
When working with the product, it is necessary to comply with sanitary and hygienic requirements and use personal protective equipment to prevent direct contact with skin and eyes.
Do not eat, drink, or smoke while working with the admixture.
PACKAGING, TRANSPORTATION, AND STORAGE
The liquid admixture is supplied in bulk into the buyer's clean plastic or metal containers of various capacities.
The admixture is transported by any mode of transport in accordance with freight carriage regulations.
The admixture should be stored indoors at temperatures above freezing in airtight packaging.
Protect the admixture from direct sunlight, heating above 50°C, and freezing.
The shelf life is 12 months from the date of manufacture.
The admixture is a non-flammable liquid.
The admixture is classified as a low-hazard substance (Hazard Class IV according to GOST 12.1.007-86) in terms of its effect on the human body.
When working with the product, it is necessary to comply with sanitary and hygienic requirements and use personal protective equipment to prevent direct contact with skin and eyes.
Do not eat, drink, or smoke while working with the admixture.
PACKAGING, TRANSPORTATION, AND STORAGE
The liquid admixture is supplied in bulk into the buyer's clean plastic or metal containers of various capacities.
The admixture is transported by any mode of transport in accordance with freight carriage regulations.
The admixture should be stored indoors at temperatures above freezing in airtight packaging.
Protect the admixture from direct sunlight, heating above 50°C, and freezing.
The shelf life is 12 months from the date of manufacture.
The admixture is a non-flammable liquid.
© ПОЛИСТРОЙХИМ - ЧАСТНОЕ ТОРГОВО-ПРОИЗВОДСТВЕННОЕ УНИТАРНОЕ ПРЕДПРИЯТИЕ УНП 191604636, ОКПО 380484815000
Head Office:
Belarus, Minsk, 23 Uruchskaya St., Office 402B
Multi-line:
+375 (17) 51-25-911
Belarus, Minsk, 23 Uruchskaya St., Office 402B
Multi-line:
+375 (17) 51-25-911
