BETOPLAST LL The admixture is produced in liquid form in accordance with TU 191604636.006-2015 as a commercial concentration solution. A Group I concrete plasticizer additive based on polymer compositions that extends the workability time of the concrete mix. It ensures retention of workability for two hours or more. |
Printed format and Technical Certificate
BETOPLAST LL
BETOPLAST LL
PROPERTIES OF THE ADDITIVE
PROPERTIES OF THE ADDITIVE
USE OF THE ADDITIVE
DOSING THE ADDITIVE
The recommended dosage of BETOPLAST LL is 0.8–1.5% by weight of cement.
Using the BETOPLAST LL admixture allows the mixing water content to be reduced by 20–30% relative to the initial amount.
It is most effective when added together with the mixing water.
The additive is most effective when administered with water.
- The BETOPLAST LL admixture is primarily used in the production of ready-mixed concrete for cast-in-place construction.
- BETOPLAST LL does not increase the air content of the fresh concrete mix, does not alter the concrete's color, and does not cause surface efflorescence.
- The admixture is chloride-free and suitable for use in reinforced and prestressed concrete structures.
- It does not cause corrosion of reinforcement or concrete.
USE OF THE ADDITIVE
- Production of high-strength concrete grades (up to C40/50 and higher) using highly flowable (fluid) concrete mixes with a low water-cement ratio.
- Increasing the workability of the mix from P1 to P5 or higher without loss of strength.
- Increasing the initial and final strength of concrete, as well as enhancing its density, frost resistance, water impermeability, and other physicochemical and mechanical properties.
- Reduction in cement consumption by 20% or more.
- Improvement of the properties of pumpable concrete mix (prevents mix segregation).
- Upgrading the concrete surface finish category.
- Reduction of energy consumption (during vibration and heat-and-moisture treatment) and labor requirements for placing and compacting the concrete mix.
- Increased workability retention of the concrete mix compared to conventional plasticizers.
DOSING THE ADDITIVE
The recommended dosage of BETOPLAST LL is 0.8–1.5% by weight of cement.
Using the BETOPLAST LL admixture allows the mixing water content to be reduced by 20–30% relative to the initial amount.
It is most effective when added together with the mixing water.
The additive is most effective when administered with water.
Occupational Safety and Health
In terms of its effect on the human body, the BETOPLAST LL additive is classified as a low-hazard substance (Hazard Class IV according to GOST 12.1.007-86).
When handling the product, it is necessary to observe health and safety requirements and use personal protective equipment to prevent direct contact with the skin and eyes.
Do not drink, eat, or smoke while working with the additive.
PACKAGING, TRANSPORTATION, STORAGE
In terms of its effect on the human body, the BETOPLAST LL additive is classified as a low-hazard substance (Hazard Class IV according to GOST 12.1.007-86).
When handling the product, it is necessary to observe health and safety requirements and use personal protective equipment to prevent direct contact with the skin and eyes.
Do not drink, eat, or smoke while working with the additive.
PACKAGING, TRANSPORTATION, STORAGE
- The liquid additive is dispensed in bulk into the customer's clean plastic or metal containers of various capacities.
- The additive is transported by any mode of transport in accordance with cargo transportation regulations.
- The additive is stored in enclosed spaces at above-freezing temperatures in hermetically sealed containers.
- The additive is a non-flammable liquid.
- The additive should be protected from direct sunlight, temperatures above 50°C, and freezing.
- Shelf life — 24 months from the date of manufacture.
© ПОЛИСТРОЙХИМ - ЧАСТНОЕ ТОРГОВО-ПРОИЗВОДСТВЕННОЕ УНИТАРНОЕ ПРЕДПРИЯТИЕ УНП 191604636, ОКПО 380484815000
Head Office:
Belarus, Minsk, 23 Uruchskaya St., Office 402B
Multi-line:
+375 (17) 51-25-911
Belarus, Minsk, 23 Uruchskaya St., Office 402B
Multi-line:
+375 (17) 51-25-911
